EM 5000

Hourly output up to 2000 kg
The Extruder mod. EM 5000 is a machine suitable for the production of cylindrical products having weights from 300 gr to 10 kg (according to the cheese length) and, eventually, also higher weights. This machine is suitable to extrude the following products: MOZZARELLA FOR PIZZA – MELTED CHEESE – FOODSTUFFS

The machine can be fed either by a continuous stretching machine or by an Almac steam stretcher mod. FV. Pasta filata is introduced into the in-feed hopper and by means of two counter-rotating augers it’s transported to the conveyor cone, to which the extruding pipe is connected and which can be replaced according to the product desired shape. The EM 5000 augers body is surrounded by a double jacket heated by electrical heating elements for keeping pasta temperature constant. Furthermore, as the extruder is always coupled to a clipping machine, it is equipped with all necessary controls for the coupled operation of the two machines.

Construction features

  • Machine completely built in AISI 304 stainless steel and plastic materials certified for the food use.
  • Parts in contact with the cheese are coated with non-sticking material.
  • The augers chamber is equipped with water double jacket, heated by an electrical heating element.
  • Dismountable stretching water discharging filter.
  • Dough feeding augers built to be easily dismantled without using any tool.
  • Adjustable augers rotation speed.
  • Motorizations protected by AISI 304 stainless steel cases.
  • Motorization equipped with spacer to allow the cleaning between the motor and the moulding chamber.
  • Motorization with electronic inverter.
  • Connections with bending radius built in such a way to avoid any stagnation point.
  • PTC probe for detecting the water temperature into the double jacket
  • Watertight electrical control panel with IP 65 protection degree, built in AISI 304 stainless steel, complete with electronic devices for the processing speed adjusting and the operator’s safety control.
  • Dismantling easiness of the movable parts without using any tool and complete inspection possibility.
  • Set of safety sensors against accidents to start the machine stop up in case of guards opening

Advantages

  • Possibility to mould cheeses with different diameters and weights by the simply replacing of the extruding pipe.
  • Controls simple use.
  • Easy disassembly by the operator of parts in contact with foodstuffs without the help of any tool for facilitating the washing and sanitation operations.

Technical data

Extruder mod. EM5000

  • Length (mm) 1600
  • Height (mm) ~ 2060
  • Width (mm) 850
  • Feeding height (mm) ~ 1.500
  • Discharging height (mm) 1.050
  • Augers diameter (mm) 200
  • Weight (empty machine) (Kg) 600
  • Hourly output (Kg/h) 100 – 2000
  • Line tension (V) 400
  • Auxiliary circuits tension (V) 24
  • Frequency (Hz) 50
  • Installed electrical power (kW) 9.5
  • Absorbed current (A) 24

EM 5000